C-TEC 16 Zone One Loop Addressable Fire Alarm System Builder | Hochiki ESP Protocol

Sub-total £345.00

Compatible

Product	Price (ex VAT)	Quantity	Total (ex VAT)
	£ ex VAT		£0.00

Sub-total

Have you seen the same FireShield products?
Shop now for more competitive prices and a greater range.

Shop Now

Continue

C-TEC 16 Zone One Loop Addressable Fire Alarm System Builder | Hochiki ESP Protocol

Name: C-TEC 16 Zone One Loop Addressable Fire Alarm System Builder | Hochiki ESP Protocol
Brand: C-tec
Price: 414 GBP
Availability: InStock

Code: FDS350/004

£414.00

INC VAT

Code: FDS350/004

16 zone single loop addressable system builder
Based on C-TEC XFP control panel
Compatible with Hochiki ESP protocol devices

Add these extras to your kit

Please Select

Yucel 12vdc Trade Fire Alarm Batteries(£13.32 inc vat)

Hochiki HCP-E (SCI) Addressable Manual Call Point(£34.32 inc vat)

Hochiki ALN-EN(WHT) | Addressable Optical Smoke Detector(£33.24 inc vat)

Hochiki ATJ-EN(WHT) Addressable Heat Detector(£33.24 inc vat)

Hochiki YBN-R/3(WHT) | ESP Protocol Addressable Mounting Base | White Body(£2.34 inc vat)

Hochiki YBO-BS(WHT) | ESP Protocol Addressable Base Sounder | White Body(£31.80 inc vat)

Hochiki YBO-BSB2(WHT)/WL | ESP Protocol Addressable Sounder VAD Base | White Body/White Lens(£58.56 inc vat)

Have a question about this? Click here

Overview Features Technical Data Downloads & Resources

The C-TEC 16 Zone One Loop Addressable Fire Alarm System Builder allows you to configure a complete system around the C-TEC XFP single loop control panel using Hochiki ESP protocol devices.

This is not a pre-set kit. It is a flexible builder format designed to let you select the detectors, call points, sounders and accessories required for your specific project.

At the core of the system is the C-TEC XFP 16 zone single loop addressable panel, offering dependable performance for commercial installations at a competitive price point.

The panel is LPCB certified to EN54-2 and EN54-4 and is supplied in a flush or surface mountable enclosure.

It provides combined keypad and key switch entry to Access Levels 2 and 3 for secure operation.

Fully compatible with Hochiki ESP field devices, the system supports addressable detection with clear device identification and streamlined commissioning.

Use the options above to build and customise your system to match your site requirements and simplify the ordering process.

16 zone single loop addressable system builder
Based on C-TEC XFP control panel
Compatible with Hochiki ESP protocol devices
LPCB certified to EN54-2 and EN54-4
Flush or surface mountable enclosure
Keypad and key switch access Levels 2 and 3
Flexible configuration to suit project requirements
Ideal for commercial fire alarm installations

Feature	Specification
Approvals/certifications	EN54-2 & 4 by the LPCB
Protocol/compatibility	Hochiki
Mains supply	230V 50/60Hz
Mains rated current	350mA maximum
Internal power supply	27Vdc nominal
Total output current	1.4A @ 230Vac (Imax.A 210mA; Imin. 40mA)
Quiescent current	50mA (loop unloaded)
Battery size and type	2 x 12V 3.2Ah VRLA connected in series
No. of loop drivers	1
Max. loop output current	500mA (25V min; 34V max)
Max. loop length	1KM
Max. addressable devices per loop	126
Conventional sounder circuits	2 (Max. length per circuit is 500m)
EOL resistor value	6800Ω 5% Tol. 0/25W (blue, grey, red, gold)
Max. sounder output current	400mA
Auxiliary relays	3 x Programmable Relays, 1 x Fault Relay (active when no faults are present)
Max. switch current/voltage	1A / 30Vdc
Other outputs	24V Aux. Power (19.5V min, 28V max) Protected by a resettable fuse, Max. current 100mA
Auxiliary inputs	2 x Programmable Inputs. Connect to 0V to trigger, Max. input voltage 27V (non-latching)
PC connection	Via RS232 molex connector (supplied in XFP507 upload/download software kit)
Indicators	2 line x 40 character backlit display, 16 Zonal LEDs
Connections	Fixed, largest acceptable conductor size 1mm²
Expansion connections	2-wire RS485 non-redundant network/repeater connection available via optional XFP761 network card
Product dimensions	380 W x 235 H x D 96mm
Construction & finish	Plastic lid and base; RAL7035 textured
IP Rating	IP30
Weight	1.8kg (without batteries)
Operating conditions/temperature	-5ºC to +40ºC. Max relative humidity: 95%

C-TEC 16 Zone One Loop Addressable Panel Datasheet

Click here to download

Overview

Features

Technical Data

Feature	Specification
Approvals/certifications	EN54-2 & 4 by the LPCB
Protocol/compatibility	Hochiki
Mains supply	230V 50/60Hz
Mains rated current	350mA maximum
Internal power supply	27Vdc nominal
Total output current	1.4A @ 230Vac (Imax.A 210mA; Imin. 40mA)
Quiescent current	50mA (loop unloaded)
Battery size and type	2 x 12V 3.2Ah VRLA connected in series
No. of loop drivers	1
Max. loop output current	500mA (25V min; 34V max)
Max. loop length	1KM
Max. addressable devices per loop	126
Conventional sounder circuits	2 (Max. length per circuit is 500m)
EOL resistor value	6800Ω 5% Tol. 0/25W (blue, grey, red, gold)
Max. sounder output current	400mA
Auxiliary relays	3 x Programmable Relays, 1 x Fault Relay (active when no faults are present)
Max. switch current/voltage	1A / 30Vdc
Other outputs	24V Aux. Power (19.5V min, 28V max) Protected by a resettable fuse, Max. current 100mA
Auxiliary inputs	2 x Programmable Inputs. Connect to 0V to trigger, Max. input voltage 27V (non-latching)
PC connection	Via RS232 molex connector (supplied in XFP507 upload/download software kit)
Indicators	2 line x 40 character backlit display, 16 Zonal LEDs
Connections	Fixed, largest acceptable conductor size 1mm²
Expansion connections	2-wire RS485 non-redundant network/repeater connection available via optional XFP761 network card
Product dimensions	380 W x 235 H x D 96mm
Construction & finish	Plastic lid and base; RAL7035 textured
IP Rating	IP30
Weight	1.8kg (without batteries)
Operating conditions/temperature	-5ºC to +40ºC. Max relative humidity: 95%

Downloads & Resources

C-TEC 16 Zone One Loop Addressable Fire Alarm System Builder | Hochiki ESP Protocol

£414.00

C-TEC 16 Zone One Loop Addressable Fire Alarm System Builder | Apollo XP95 Protocol

C-TEC 16 Zone One Loop Addressable Fire Alarm System Builder | CAST Protocol

C-TEC 32 Zone One Loop Addressable Fire Alarm System Builder | Apollo XP95 Protocol

C-TEC 32 Zone One Loop Addressable Fire Alarm System Builder | CAST Protocol

C-TEC 32 Zone Two Loop Addressable Fire Alarm System Builder | Apollo XP95 Protocol

C-TEC 32 Zone Two Loop Addressable Fire Alarm System Builder | CAST Protocol