Apollo Soteria SA5100-700APO Isolating Optical/Heat Multisensor Detector

Sub-total £41.13

Compatible

Product	Price (ex VAT)	Quantity	Total (ex VAT)
	£ ex VAT		£0.00

Sub-total

Have you seen the same FireShield products?
Shop now for more competitive prices and a greater range.

Shop Now

Continue

Apollo Soteria SA5100-700APO Isolating Optical/Heat Multisensor Detector

Name: Apollo Soteria SA5100-700APO Isolating Optical/Heat Multisensor Detector
Brand: Apollo
Price: 49.356 GBP
Availability: InStock

Code: FDS601/094

£49.36

INC VAT

Code: FDS601/094

Apollo SA5100-700APO
Integrated short-circuit isolator
10 year warranty

Have a question about this? Click here

Overview Features Technical Data Downloads & Resources

The Apollo Soteria SA5100-700APO is an isolating optical and heat multisensor detector designed to deliver flexible and reliable fire detection within intelligent addressable systems.

It combines advanced PureLight optical sensing technology with dual thermistors, allowing the detector to be configured for smoke detection, heat detection or a combined response depending on the application. This makes it suitable for environments where a single sensing method may not provide the most appropriate level of performance.

An integrated short-circuit isolator is built into the detector head to help maintain loop integrity in the event of a wiring fault, supporting system resilience and reducing potential downtime.

The detector is designed for connection to a two-wire loop carrying both data and power, simplifying installation while ensuring full communication with compatible control equipment.

A low-profile housing and 360° tri-colour LED indicator provide clear visual status from any angle, with red for alarm, flashing yellow for fault and green for protocol activity.

As part of the wider Apollo Soteria range, this multisensor detector offers consistent performance and compatibility across modern fire alarm installations.

Apollo SA5100-700APO
Integrated short-circuit isolator
10 year warranty
Tri-coloured LED status indicator
Polycarbonate moulding for colour stability and strength
Tested to exceed EN 54-5 & EN 54-7 standards
100mm diameter
Dual heat sensors
PureLight optical technology reduces false alarms and enhances smoke recognition
Utilises digital CoreProtocol communications

Specification	Details
Notes	All data is supplied subject to change without notice. Specifications are typical at 24 V, 25°C and 50% RH unless otherwise stated.
Detection principle	Smoke – Photo-electric light scatteringHeat – Thermistor
Sensor configuration	Smoke – Chamber with surface-mount infrared emitter and prism. Solid state integrated photo-diode and amplifierHeat – Dual exposed heat sensing elements
Sampling frequency	Once per second
Terminal functions (L1 and L2 polarity sensitive)	+L2 – Loop in and out positive–L1 in – Loop isolated negative–L1 out – Loop isolated negative+R – Remote indicator positive connection, internal connection to positive–R – Remote indicator negative connection, 4.7 mA maximum
Supply voltage (Vmin–Vmax)	17V – 35 Vdc
Digital communication	XP95, Discovery and CoreProtocol compatible
Modulation voltage	5 V – 13 V peak to peak
Quiescent current	Isolated detector 350 µA
Power-up surge current	560 µA
Maximum power-up time	10 seconds
Alarm current, LED illuminated	3.5 mA
Clean-air analogue value (excluding Mode 5)	23 +4/-0
Alarm level analogue value	55
Status indicator	Alarm – RedFault – Flashing YellowIsolate – YellowPoll – Green
Operating temperature	–40°C to 70°C
Humidity	0% to 95% RH, no condensation or icing
Effect of atmospheric pressure	None
Effect of wind speed	None, tested up to 10 m/s
Vibration, impact and shock	EN 54-5:2017 and EN 54-7:2018
IP rating	IP44
Standards and approvals	EN 54-5:2017, EN 54-7:2018
Dimensions	100 mm diameter x 38.5 mm height
Weight	96 g, +/- 10%
Materials	Housing: White flame-retardant polycarbonateTerminals: Nickel plated stainless steel

Apollo Soteria SA5100-700APO Datasheet

Click here to download

Overview

Features

Technical Data

Specification	Details
Notes	All data is supplied subject to change without notice. Specifications are typical at 24 V, 25°C and 50% RH unless otherwise stated.
Detection principle	Smoke – Photo-electric light scatteringHeat – Thermistor
Sensor configuration	Smoke – Chamber with surface-mount infrared emitter and prism. Solid state integrated photo-diode and amplifierHeat – Dual exposed heat sensing elements
Sampling frequency	Once per second
Terminal functions (L1 and L2 polarity sensitive)	+L2 – Loop in and out positive–L1 in – Loop isolated negative–L1 out – Loop isolated negative+R – Remote indicator positive connection, internal connection to positive–R – Remote indicator negative connection, 4.7 mA maximum
Supply voltage (Vmin–Vmax)	17V – 35 Vdc
Digital communication	XP95, Discovery and CoreProtocol compatible
Modulation voltage	5 V – 13 V peak to peak
Quiescent current	Isolated detector 350 µA
Power-up surge current	560 µA
Maximum power-up time	10 seconds
Alarm current, LED illuminated	3.5 mA
Clean-air analogue value (excluding Mode 5)	23 +4/-0
Alarm level analogue value	55
Status indicator	Alarm – RedFault – Flashing YellowIsolate – YellowPoll – Green
Operating temperature	–40°C to 70°C
Humidity	0% to 95% RH, no condensation or icing
Effect of atmospheric pressure	None
Effect of wind speed	None, tested up to 10 m/s
Vibration, impact and shock	EN 54-5:2017 and EN 54-7:2018
IP rating	IP44
Standards and approvals	EN 54-5:2017, EN 54-7:2018
Dimensions	100 mm diameter x 38.5 mm height
Weight	96 g, +/- 10%
Materials	Housing: White flame-retardant polycarbonateTerminals: Nickel plated stainless steel