Book your manufacturer training with Fire Detection Shop today
| Product | Price (ex VAT) | Quantity | Total (ex VAT) |
|---|---|---|---|
|
|
£
ex VAT
|
£0.00
|
Code: FDS100/324
INC VAT
Code: FDS100/324
The Hochiki HCP-E Manual Call Point is an addressable indoor call point designed for use with fire alarm systems that operate on Hochiki’s ESP analogue addressable protocol.
It allows users to manually activate the fire alarm system in the event of an emergency and is commonly installed near exits, in corridors, and at key locations throughout a building.
The HCP-E features a bi-colour LED indicator that clearly displays status conditions — red for fire activation and amber for fault — helping engineers and occupants identify device state at a glance.
Integral short circuit isolator
Bi-colour status LED
Resettable element
Plug in wiring terminal
LPCB Approved to EN54
Specification | Detail |
|---|---|
Operating Voltage | 17 – 41 VDC |
Low Power Mode (typ) | 180 µA (max), 100 µA (typ) |
Quiescent Current | 350 µA (max), 250 µA (typ) |
Alarm Current | 10.0 mA (max), 5 mA (typ) |
Resistance in Positive | 100 mΩ when closed (max), 100 kΩ when open (min) |
Short-Circuit Threshold (typ) | 430 Ω |
Transmission Method | Digital Communication Using ESP |
Operating Temperature Range | -10 °C to +50 °C |
Storage Temperature Range | -30 °C to +70 °C |
Maximum Humidity | 95% RH – Non Condensing (at 40 °C) |
Ingress Protection Rating | IP24 |
Colour / Case Material | Red / Modified Polyphenylene Oxide |
Weight (g) / Dimensions (mm) | Flush Unit: 110 g / W 89 × H 93 × D 27.5 mm Surface Mount: 161 g / W 89 × H 93 × D 59.5 mm (Backbox purchased separately) |
The Hochiki HCP-E Manual Call Point is an addressable indoor call point designed for use with fire alarm systems that operate on Hochiki’s ESP analogue addressable protocol.
It allows users to manually activate the fire alarm system in the event of an emergency and is commonly installed near exits, in corridors, and at key locations throughout a building.
The HCP-E features a bi-colour LED indicator that clearly displays status conditions — red for fire activation and amber for fault — helping engineers and occupants identify device state at a glance.
Integral short circuit isolator
Bi-colour status LED
Resettable element
Plug in wiring terminal
LPCB Approved to EN54
Specification | Detail |
|---|---|
Operating Voltage | 17 – 41 VDC |
Low Power Mode (typ) | 180 µA (max), 100 µA (typ) |
Quiescent Current | 350 µA (max), 250 µA (typ) |
Alarm Current | 10.0 mA (max), 5 mA (typ) |
Resistance in Positive | 100 mΩ when closed (max), 100 kΩ when open (min) |
Short-Circuit Threshold (typ) | 430 Ω |
Transmission Method | Digital Communication Using ESP |
Operating Temperature Range | -10 °C to +50 °C |
Storage Temperature Range | -30 °C to +70 °C |
Maximum Humidity | 95% RH – Non Condensing (at 40 °C) |
Ingress Protection Rating | IP24 |
Colour / Case Material | Red / Modified Polyphenylene Oxide |
Weight (g) / Dimensions (mm) | Flush Unit: 110 g / W 89 × H 93 × D 27.5 mm Surface Mount: 161 g / W 89 × H 93 × D 59.5 mm (Backbox purchased separately) |
FDS600/883
FDS600/013
FDS600/012
FDS550/133
FDS700/307
If you’re looking for high quality fire detection, security of fire safety equipment, we are your one-stop-shop for everything you need to get your job done.
Fire Detection Shop has a wide range of products, kits and accessories in stock and ready to ship - so you can place your order now with confidence.
To help you choose the right product, our technical team are on the end of the telephone to answer your questions. Alternatively, you can complete the form here and one of our specialists will call you back.
We have a team of in-house engineers trained to design, install and commission the products we sell. If you’re interested in the services we can provide you with a quotation.
We use cookies to enhance your site experience. Choose your preferences below.